Briggs & Stratton Petrol Engines

Product Details:

MTT code - 1062320129H1

750 Series(TM)

Briggs & Stratton general purpose horizontal shaft engines are built to be tough, reliable and efficient. Feature for feature, they offer you the best value available. The 750 SERIES(TM) engine is ideal for tillers, generators, pressure washers, and water pumps.

 

Additional Information:

• Item Code: series750
• Port of Dispatch: mumbai
• Delivery Time: ready

Product Details:

Engine - Single cylinder OHV 4 stroke technology
Power - 224cc / 6.5hp @ 3200 RPM
Cutting Deck - 21"
Type - Push or Self propelled
Starting - Recoil or Electric button start

Product Details:

Briggs & Stratton 550 Series Horizontal OHV Engine — 127cc, 6:1 Gear Reduction, max RPM 600 Model# 083152 1141H1BH7001

This model is specially designed for agriculture spay diaphragm type pumps, where the max required output RPM from engine is 600. all diaphragm type pumps are designed to run at 550 rpm, to reduce the rpm you would require an extra reduction gearbox, with this engine you do not require any gearbox as it has built-in 6:1 reduction. directly couple the pump to the engine and save the cost of reduction gearbox.

• Application - agriculture diaphragm type spray pumps.

Key Specs

 

Product Details:

Keeping in mind, ever-evolving requirements of our valuable clients, we are offering an exclusive range of Lawn Mower Petrol Engines. Keeping in mind current market development, these engines are manufactured by our qualified professionals employing quality proven raw material and modernize tools. Apart from this, our quality inspectors perform a series of quality test on this engine ensuring its flawlessness.

 

Model Number - 1008

Gross Torque* (Nm) @ 3060 rpm - 10.2

Cylinder - Cast Iron Sleeve

Stroke (mm) - 50.0

Oil Capacity (L) - 0.6

Length (mm) - 369

Height (mm) - 254

Engine Configuration - Single cylinder, 4-stroke, air-cooled, DOV® (Direct Overhead Valve)

Engine Displacement (cc) - 161

Bore (mm) - 64.0

Fuel Tank Capacity (L) - 1.0

Weight (kg) - 12.7

Width (mm) - 325

 

Additional Information:

• Item Code: 675series

wide range of briggs and stratton engines available to run on Bio-Gas fuel.engine range - 127cc to 900cc light weight portable models for generator application.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

offering briggs and stratton, 3.5hp 127cc Light weight, low vibration sturdy engine for HTP sprayer application at very low subsidies

ISI approved engine.

Key Specs

Product Details:

Beginning in 2017, this program will now be powered by our M19 Vanguard commercial engine (19L232-0054 G1).
COMMERCIAL ONLY FEATURES

• Reinforced, Cast Iron Sleeved dual bearing cylinder
• Heavy duty, extended service life ball bearings
• Squeeze cast, T-7 heat racing designed connecting rod
• Custom Graph-oil racing head gasket
• Magnetron Electronic Ignition
• TransportGuard System –Simultaneous fuel/ignition shutoff protection

• Full Skirt Metal Rewind maximized for air flow
• Forged crankshaft

Additional Information:

• Item Code: model19

Product Details:

B&S light weight high speed engines specially designed for portable fire fighting float pump. 

Product Details:

offering briggs and stratton, 3.5hp 127cc Light weight, low vibration sturdy engine for HTP sprayer application at very low subsidies

ISI approved engine.
Type: 4 stroke

Key Specs

Product Details:

For over 20 years, Briggs & Stratton has worked with the Society of Automotive Engineers (S.A.E.) in providing power for their Mini Baja and Supermileage programs. Starting for the 2000 season the S.A.E. Mini Baja Program began using the Model 20 INTEK as their engine of choice, replace the Model 19 after 20 plus years as the workhorse...

Additional Information:

• Item Code: model20

Product Details:

2100 Series™

Briggs & Stratton general purpose horizontal shaft engines are built to be tough, reliable and efficient. Feature for feature, they offer you the best value available. The 2100 SERIES™ engine is ideal for tillers, generators, pressure washers, and water pumps.

Model# 25T232

Additional Information:

• Item Code: series2100

Product Details:

Series 3 PowerBuilt™

The PowerBuilt™ line is an entry-line of engines that are value-engineered for residential needs. Featuring OHV (OverHead Valve) technology, AVS® Anti-vibration system and the simple-to-maintain design, ensure a smooth running durable and longer lasting engine.

Specifications:

 

Additional Information:

• Item Code: series3-334cc

Product Details:

By utilizing skills of our dexterous workforce, we are offering a comprehensive assortment of OHV Petrol Engines. Our competent professionals manufacture this engine by employing quality proven raw material and sophisticated technology in adherence to the set industry standards. Owing to features like precise design and easy to operate, our offered engine has been able to earn a lot of popularity in the market. Moreover, our valuable clients can avail this engine from us at market leading prices.

Specifications:

Product Details:

We offer Briggs and stratton 6.5hp engine for the application of Railway track cutter Special tool for cutting off rail in railway construction, maintenance or emergency construction.
Option of gear reduction with 1800 rpm is also available.
option of oil filer for use in dusty condition is also available.

Product Details:

Product Details:

offering briggs & stratton petrol engines for powr trowel application.
Engine power - 163cc, 5.0hp
RPM - 3600 max
also available with reduction gearbox in 6.5hp series.

Product Details:

13 HP Petrol Engines For Fire Fighting Mist Machine/ Suppressor

We offer briggs and stratton 13hp, 420cc (25T2) series 2100 petrol engines for Misting machine used for fire fighting application.
this are available in both recoil and electric start option.

Product Details:

Vanguard 37hp Efi Vtwin Petrol Engine

Vanguard™ is the innovator and proven leader for BIG BLOCK™ V-Twin engine power, performance and reliability. For the most challenging applications—where downtime is not an option—this BIG BLOCK V-Twin engine lineup has been expertly engineered to deliver the dependability hardworking people need to get a lot more done throughout the day.

Typical applications include: Concrete Trowels, Chippers/Shredders, Commercial Mowers and Mud Boats.

Product Details:

The premium VANGUARD™ V-Twin horizontal engine range has been designed and application engineered to deliver the most durable performance. The premium engine range offers a full 3-Year limited global warranty for commercial use which demonstrates our commitment to deliver the best performing products.

Product Details:

Briggs and stratton vertical shaft petrol engines are ideal for portable hydraulic powerpack used in railways, airforce, firefighting application.
Available from 5.0 to 23hp with option of recoil and electric starting.

Product Details:

we offer commercial light weight with low fuel consumption petrol engines for milking machine application.
127cc petrol engine with ISI approval certification.

Product Details:

Intek™ Series (Single Cylinder), 10.50-18.50 GROSS HORSEPOWER

Product Details:

offering wide range Briggs and stratton Vertical shaft engines for power trowel application.

* Available from 4.5 to 6.5hp.
* Availbale in recoil and electric start option.
* Rpm of 3200
* also available in Electric start option 

VANGUARD™ 14-16 Gross HPThe premium VANGUARD™ V-Twin horizontal engine range has been designed and application engineered to deliver the most durable performance. The premium engine range offers a full 3-Year limited global warranty for commercial use which demonstrates our commitment to deliver the best performing products. 

Additional Information:

• Item Code: 305447

Product Details:

Briggs and stratton OHV 208cc 4 stroke aircool petrol engine with built-in 2:1 gear reduction box of 1800 rpm output.
Fitted with imported Stainless steel Long Tail Shaft propeller for small fishing boats.

shaft length of 90 inches
Propeller of 9 " dia

Product Details:

Briggs & Stratton New InStart™ Lithium-Ion Electric Start Engine.It’s the perfect combination of petrol power and smart starting 

! No more pulling
! No more priming
! No more choking

A traditional lawn mower will be started 1000’s of times over its life, by pulling the starting rope. InStart from Briggs & Stratton delivers the next generation in easy starting. Ingenious integration of engine and battery gives you cutting power at a touch. No more pulling to start!

We know life can be unpredictable, but starting your lawn mower shouldn’t be. With Briggs & Stratton’s new InStart lithium-ion electric start engine, take the guessing game out of starting your lawn mower.The world’s first lawn mower to combine the power of gas and the starting reliability of lithium ion battery technology, Briggs & Stratton InStart is the easiest electric starting engine. Unlike traditional lead acid batteries, our revolutionary InStart battery can provide enough power to meet the needs of most homeowners for an entire season.

InStart Lithium-Ion Electric Start Engine Features

 

• Charges fully in one hour, delivering up to 75 starts, that can be good for an entire mowing season
• 10 minutes of rapid recharging provides 20 starts making it easy to mow lawn if there are time constraints
• Batteries last 3X longer than lead acid batteries
• Easy push button starting with ReadyStart Starting System means no prime, no choke, easy starting
• Gas powered engine delivers the power and range to cut tall grass

Product Details:

4" Trash pump powered by briggs and stratton 420cc available with recoil or electric starting system.
can be used for transfering slurry material like coco pit, cow dung.

Engine: B S 420ccEngine type: 4-stroke,OHV, Single cylinder
Displacement: 420cc
Rated output:8.2kW / 3600rmp
Suction/Discharge Dia. :4"
Total head 26m
Suction lift 8m
Max.flow 1700L/min
Pump body Aluminium alloy
Impeller Cast iron Mechanical seal Silicon Carbide
Self-priming time: 150 seconds
Fuel tank capacity: 6.3 L
solids (pebbles and debris)up to 27mm

Product Details:

Trash pumps - Briggs and stratton Engine with Professional Series Pump For agriculture, construction and Civil engineering applications.

Designed to handle solids in water up to 25mm in size, the pump comes in a robust steel roll-over frame for protection on any worksite. The pump's quick-release feature means that any debris can be quickly and easily removed from a blocked impeller, making for easy maintenance and ensuring sustained performance for years to come. It has rapid self-priming capability

Suited to:

• Construction and Building Site muddy water dewatering
• Agricultural and Farming
• Mining and Industry Job Sites

Applications:

• Transferring water with medium sized solids/debris
• General Purpose Water Transfer
• Tank de-watering
• Waste water handling, effluent pump out and slurry pumping

Main Features:

• Capable of sucking solid debris up to 22~27mm
• Rapid self-priming capability (after initial prime)
• Quick release clean-out for simple impeller maintenance and overall pump durability
• Briggs and Stratton 420cc 4-Stroke Petrol Engine
• Easy recoil start
• Max Flow Rate of 1700 litres per minute
• Max Head of 28 metres

Briggs & Stratton Series 2100, 420cc OHV Engine

• A compact overhead valve designed commercial grade engine
• Heavy-duty dual ball bearings
• Mechanical governor

Dura-Bore Cast Iron Cylinder Sleeve

• Withstands wear and abuse while providing improved oil control

Thrust Balance Impeller

• Better handles pump loads for extended engine life
• Pump body made of strengthen aluminum alloy, light weight and portable.

• Diffusor and impeller made of ductile cast iron, 10 times better in corrodibility.
• High quality silicon carbide mechanical seal.
  Lo-Tone Muffler
• Lower noise level without giving up power

Briggs Stratton Series 2100, 420cc OHV Engine

• A compact overhead valve designed commercial grade engine
• Heavy-duty dual ball bearings
• Mechanical governor

 

Dura-Bore Cast Iron Cylinder Sleeve

• Withstands wear and abuse while providing improved oil control

 

Thrust Balance Impeller

• Better handles pump loads for extended engine life
• Pump body made of strengthen aluminum alloy, light weight and portable.
• Diffusor and impeller made of ductile cast iron, 10 times better in corrodibility.
• High quality silicon carbide mechanical seal.
• Lo-Tone Muffler
• Lower noise level without giving up power

 

Engine Brand - Briggs Stratton Series 2100 (25T2)

Starting System - Recoil Start

Engine Cycles - 4-Cycle

Low Oil Shutdown - optional

Continuous Operation - Yes

Power - 420 cc

Fuel tank - 6.6 Ltrs

Starting - Rope start (recoil). Optional Electric start with battery.

Liters Per Minute - 1300

Inlet Diameter - 3"

Outlet Diameter - 3"

Self Priming - yes

Pump body Material - Aluminum alloy

Pump Housing Drain - Yes

Quick Clean Out - Yes

Mechanical Seal Material - Silicon Carbide

Impeller Material - Spheroidal graphite iron castings

Solids Handling Size - 27mm

Suction Head lift  -8m / 26 Feet

Max Head - 30m / 99 feet

Tool Kit - Yes

Strainer - Yes

Weight - 75 kgs

Product Details:

Offering briggs and stratton Vtwin vanguard engine for firefighting applications.
for more details on engines

Cooler / Cleaner Technology - Performance Enhancement Extends engine life by reducing engine and oil temperatures by 25-30 degrees, while effectively managing airborne debris

V-Twin 90 Overhead Valve Design Cooler, cleaner and more efficient operation. More HP output with less displacement, less carbon build-up. Longer valve life and improved fuel economy

Dura-Bore Cast Iron Cylinder Sleeves Withstand wear and abuse while providing improved oil control

Dura-Bore Cast Iron Cylinder Sleeves Keeps oil clean and extends time between oil changes for extended engine life

Dual-Clean Air Cleaner Pleated paper filter with foam pre-cleaner ensures maximum protection for extended engine life

Upper and Heavy-Duty Lower Bearing Replaceable, self-lubricating upper bearing and large lower bearing withstands load and reduces wear for longer engine life Full Length Replaceable Valve Guides and Seals Extended valve life and lower oil consumption

High Flow Cooling Package Lower engine and oil operating temperatures to extend engine life

Mechanical Governor Additional power under heavy mowing conditions

Magnetron® Electronic Ignition Quick, dependable starts with no maintenance required Mechanical Compression Release Smooth, easy starts and instant return to maximum power after starting

Engine Warranty Two-year engine warranty for consumer or Comercial use applications

Number of Cylinders2Gross Power: (kW/HP) 17.2 @ 3600 / 23 @ 3600Peak Gross Torque: (Nm/ft-lbs)Bore: (mm/in) 75.5 / 3Stroke: (mm/in) 70 / 2.8Displacement: (cm³/in³) 627 / 38.3Oil Capacity: (l/oz) 1.7 / 56 (with filter)

Positioned in the industry as a manufacturer, exporter, distributer & wholesaler & supplier, we are engaged in offering Needle Vibrator Engine. This engine is manufactured using high grade basic material and cutting edge technology at our end. Further, these engines are stringently checked under the supervision of our quality controllers on various quality parameters set by the industry. In order to fulfill variegated demands of clients, this engine is made available in customized options.

Features:

• Industry approved design
• Quick installation
• Optimum strength

Specifications:

• Available with 3.5, 4.5 & 6 hp power

Additional Information:

• Item Code: 550

Product Details:

Ha-Ko group offers Briggs and stratton Vanguards series of Vtwin engines specially designed for fire fighting pumps application.
The range starts from 16hp to 35hp having very low vibration, low sound, light weight, sturdy engine, 3600 rpm, with electric start option.

Product Details:

In 1976 the Society of Automotive Engineers (S.A.E.) launched the 'Baja' collegiate competition. This competition series challenges engineering students to design, engineer and build from the ground up an off-road vehicle, each powered by a Briggs Stratton engine. Today this program has competitions held worldwide and an estimated 2,000 universities actively participate for top honors.

Originally powered by our Model 19 side valve engine this program in 2000 moved to our Model 20 overhead valve platform. Beginning in 2017, this program will now be powered by our M19 Vanguard commercial engine (19L232-0054 G1)

• Horizontal engine
• Dura-bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control
• Maintenance-free magnetron electronic ignition for quick, dependable starts
• Overhead valve design (OHV) for cooler operation
• Transport guard fuel and ignition switch protects oil and fuel dilution during transport
• Low oil shutdown system significantly reduces the chance of engine damage due to insufficient lubrication
• Commercial-style carburetors with additional fuel passages that ensure reliable starts and smooth running operation at a wide range of loads
• Recoil start with auto compression release
• Briggs Stratton commercial power designs and manufactures premium-grade Vanguard engines ranging from 5.5 to 36.0 gross horsepower, proven on work sites around the world, Vanguard engines are engineered to elevate the reliability standard, which helps people get more done in less time, backed by a global 3-year commercial limited warranty, Vanguard engines are ready to take on any work site challenge
• Crankshaft: 1 in. Dia x 2-29/32 in. L, keyway, tapped 3/8-24

Product Details:

We offer a wide range of Small engines for Racing application.
Starting from 3.5 to 16hp Vtwin at 3600 rpm.